Control Technology RCM2030L Form C Contact Output Module T97052
Form C Contact. When operated the common contact will swing from the normally closed contact to the normally open contact. This type of contact controls two circuits:
When operated the common contact will swing from the normally closed contact to the normally open contact. They can be part of any type of a relay or auxiliary switch. There is a common electrical connection between a contact of each pair that results in only three connection terminals. Form x = no with both terminals disconnected when off. This type of contact controls two circuits: It is hermetically sealed with 3 leads: This is caused by the magnetic field produced by a coil or the magnetic field from a magnet. A form c contact is also called spdt. Web a form c reed switch is essentially a single pole double throw reed switch. Form c is a combination.
Web form c contacts (change over or transfer contacts) are composed of a normally closed contact pair and a normally open contact pair that are operated by the same device; Web a “ form c ” would have 3 leads and would have 1 normally open and 1 normally closed circuit. They can be part of any type of a relay or auxiliary switch. Form c contact assembly has three terminals. Web a dry contact is one that is a hard contact such as a relay or switch (as opposed to a triac or transistor). Web form c contacts (change over or transfer contacts) are composed of a normally closed contact pair and a normally open contact pair that are operated by the same device; These contacts have a common terminal. This is also called a “changeover” device because the common contact changes from the normally closed position to the normally open position when the coil is energized in a relay or a magnetic field is nearby in a reed switch. It is hermetically sealed with 3 leads: One normally open and one normally closed. Form x = no with both terminals disconnected when off.
